Westfield parts and upgrades

WESTFIELD PART NUMBER: SPECIAL EDITION MODULE 1

CONTENTS

Space frame epoxy coated chassis
Rivnuts and diff bushes
Aluminium panels supplied
Front and rear wishbones (epoxy coated and bushed)
Aluminium front and rear uprights, hubs, brake discs and calipers
Pedal assembly
Master cylinder
Drive shafts and cv joints
Differential (LSD)
Brake pipes and Aeroquip hoses
Fuel lines
Steering columns top and bottom
Battery tray
Wiring loom
Ball joints
Shock absorbers and springs
Steering rack, mountings and track rod ends
Hand brake lever and cable
Complete fastener kit

WESTFIELD PART NUMBER: SEIW CHY MAZDA-EPX

CONTENT

Space frame chassis
Top and bottom front wishbones
Engine mounting brackets
Brake lines (Aeroquip and T-Piece)
Aluminium panels set – floor pan, seat back, tunnel, scuttle
Nut and bolt pack
Riv-Nut pack
Suspension bushes
Chassis plate
Wing brackets
Hand brake cable
Bottom rear wishbones
Construction manual

WESTFIELD PART NO: 3702095

DESCRIPTION:

Wide track front wishbone 3rd generation kit, also includes front brake hoses and metalastic bushes

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.
8 suspension bushes (4313001)
2 longer brake hoses. (sei rear brake hoses required 2311007)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 1711091

DESCRIPTION:

Zetec Exhaust Manifold
Primary Manifold for Zetec Blacktop Engine
Outlet (silencer end) is 2 inches in diameter
Manifold will also suit the silver top zetec engine

WESTFIELD PART NO: 1730022

DESCRIPTION:

Westfield racing wet sump kit to suit zetec black top 2.0 litre engines.

Please note: Image is for display purposes only, Actual kit will vary!

You will also require the following parts for installation:

1 x 2951010 - Starter Motor

1 x 1734008 - Sump Gasket £22.80

1 x 1754015 - Oil Filter

WESTFIELD PART NO: 3702093

DESCRIPTION:

Wide track front wishbone kit 3rd generation.

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.

You will also require

8 suspension bushes (4313001)

2 longer brake hoses. (sei rear brake hoses required 2311007)2 Wide track front springs (3702093)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 2940064

DESCRIPTION:

Zetec Blacktop Alternator Fitting Kit
Kit components:1 x 4942056 - Alternator plate1 x 2945156 - Alternator belt 2L Blacktop1x x 2942126B - Alternator bracket Zetec R1 x 1416143 - Spacer idler pulley Zetec R1 x 1417132 - Spacer idler pulley short1 x 1470189B - Mounting plate idler pulley1 x 2943038 - Pulley1 x 2943011 - Idler pulley1 x 6811010 - M10 Lock washer single1 x 6823UTO - M10 washer1 x 8155450 - M10x45 socket cap bolt1 x 8111800 - M10x 80 hex head bolt6 x 6802801 - M8 plain washer1 x 6811008 - M8 washer lock singe coil4 x 71230008 - M8 x 1.25 nyloc nut1 x 8111308 - M8 x 30 hex head 1 x 8111358 - M8x35 hex head bolt3 x 8111408 - M8x40 hex head bolt1 x 8165840 - M8x40 special cap head

WESTFIELD PART NO: 5230010

DESCRIPTION:

Momo Team Steering Wheel Kit - ***Non IVA compliant***
280 mm steering wheel with leather trim, excellent fitment on all Westfields, kit includes spacer to increase switch clearance.
Will fit all Westfield's which have a Westfield supplied top steering column.
Kit Includes Steering wheel - 5232202 Boss adaptor - 5231002 Spacer - 5232203

WESTFIELD PART NO: 5220038

DESCRIPTION:

Zetec Steering Column Kit
This Kit will only suit black top zetec engines with standard injection or throttle bodies. If you have throttle bodies installed you can use 5221000 lower single piece column. 

WESTFIELD PART NO: 3240010

DESCRIPTION:

2.0 Zetec Black Top Clutch Kit

WESTFIELD PART NO: 2951010

DESCRIPTION:

Zetec Starter Motor To Suit Raceline Sump
Lightweight, high torque starter motor for Zetec engines with raceline sump, Zetec flywheel and type 9 gearbox.
Specification:Kilowatts     1.40 kWTeeth           10Boss Size     89mmVoltage        12 VWeight:       2.90 kg  
Current spec starter motor for black top Zetec with Raceline sump.

WESTFIELD PART NO: 5891077

DESCRIPTION:

Vinyl Covered Crash Pad
Crash pad fits along top of dashboard to cover bolts and leave a tidy finish
IVA Requirement fitted by velcro

WESTFIELD PART NO: 3712301B

DESCRIPTION:

Westfield XI Front Top Wishbone

WESTFIELD PART NO: 5222019

DESCRIPTION:

Top Steering Column with Steering Locks, Keys and Loom
To suit all models except Westfield XI and Sport Turbo

WESTFIELD PART NO: 5221216

DESCRIPTION:

Westfield XI Top Steering Column

WESTFIELD PART NO: 3713138

DESCRIPTION:

Rear anti roll bar FW bodywork set up.
Please note that this kit is not suitable for ZK bodywork
Photo is for illustration purpose only.

WESTFIELD PART NO: 4957005

DESCRIPTION:

Sport 250 Top Lambda Sensor

WESTFIELD PART NO: 5551057B

DESCRIPTION:

5 piece hood frame kit to suit FW body work
Kit includes 2 small brackets that fit inside car and 3 connecting brackets over top to support hood.

WESTFIELD PART NO: 3712215B

DESCRIPTION:

3rd Gen Wide Track Front Top Wishbone
The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

WESTFIELD PART NO: 4311173B

DESCRIPTION:

Mazda SDV Top RH Rear Wishbone