Westfield parts and upgrades

WESTFIELD PART NO: 5841053

DESCRIPTION:

Complete carpet set for MT75 Including gaiters (Widebody cars) 
***Gaiters not sewn in***Made to order - Choice of piping colour.
***Measure your tunnel to ensure you have selected the correct carpet for your vehicle. Where to measure: just above the gear lever gaiter, tunnel width should measure roughly 22 cm***

WESTFIELD PART NO: 5841037

DESCRIPTION:

Complete carpet set for MT75 Including gaiters (Widebody cars) 
***Gaiters not sewn in***Made to order - Choice of piping colour.
***Measure your tunnel to ensure you have selected the correct carpet for your vehicle. Where to measure: just above the gear lever gaiter, tunnel width should measure roughly 22 cm***

WESTFIELD PART NO: 5552284

DESCRIPTION:

Westfield half hood for full roll cage -  Wide body Westfields (Wide body standard on all kits and cars manufactured since 2000)
Complete kit with all mountings, straps and fittings to mount the part to your car.
Will only work correctly with a Westfield FIA approved roll cage
The part is held on to the roll cage with velcro, so can be used with windscreens or aeroscreens
Fixings included - to be installed by customers.

WESTFIELD PART NO: 4633040

DESCRIPTION:

Half cage roll bar for standard/narrow body cars, with double central cross brace and 2 rear stays.

Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.
Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.
PLEASE NOTE THAT CAGE IS COLLECTION ONLY

WESTFIELD PART NO: 4633037

DESCRIPTION:

Half cage roll bar for widebody cars, with double central cross brace and 2 rear stays.
Suitable for classic and FW body styles.
Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.

Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.

Height, 485mm from roll bar mounting plates on your chassis.

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

WESTFIELD PART NO: 1255000

DESCRIPTION:

Fibreglass cycle wing for 195/205 tyres.
Listing for single cycle wing
Please leave a message on your order of the colour you require.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

SPECIAL INSTRUCTIONS:

Please note all bodywork orders are made to order due to the various colour options available. The lead time can vary from time to time so please bear this in mind when ordering. Some body panels can be very large in size, and we cannot ship them without getting wooden crates made specifically for the panel, with this in mind we would strongly advise collection but if this is not possible, please email us and we can try and obtain some shipping options for you. Please also bear in mind that in recent years there has been big changes in the laws and contents of GRP making it difficult to guarantee 100% colour matches, we will supply panels in the closest match we possibly can.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 584102X

DESCRIPTION:

Carpet set to suit type 9 gearbox (widebody vehicles).
Black base option only.
Several piping options available.
All carpet sets made to order***Measure your tunnel to ensure you have selected the correct carpet for your vehicle. Where to measure: just above the gear lever gaiter, tunnel width should measure roughly 15 to 16 cm if you have gear lever extension or 17 to 18 without the extension***
Please be aware you can have a Type 9 gearbox in an MT75 tunnel. The carpet sets are for dictated by tunnel size not gearbox variant.
(image in picture is for illustration purposes only)

WESTFIELD PART NO: 3702137

DESCRIPTION:

Rear anti roll bar kit to suit FW style bodywork
Please note that this kit is not suitable for ZK bodywork

WESTFIELD PART NO: 5873047

DESCRIPTION:

RHD vinyl covered dashboard
Will suit all wide body cars with either fw or zk bodywork

Shipping of over sized items may attract a higher charge depending on a range of factors that cannot presently be calculated at the point of sale. We may need to apply a delivery surcharge to your order. If that situation arises, we will contact you.

WESTFIELD PART NO: 5873039

DESCRIPTION:

LHD vinyl covered dashboard
Will suit all wide body cars with either fw or zk bodywork

Shipping of over sized items may attract a higher charge depending on a range of factors that cannot presently be calculated at the point of sale. We may need to apply a delivery surcharge to your order. If that situation arises, we will contact you.

WESTFIELD PART NO: 5532004

DESCRIPTION:

Black Standard Body Windscreen

WESTFIELD PART NO: 5532001

DESCRIPTION:

Standard Body Polished Windscreen 
PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

WESTFIELD PART NO: 6147006

DESCRIPTION:

Westfield Semi Fit Soft Indoor Car Cover
This super soft, super stretchy indoor car covers are the ideal solution for those looking for a fitted car cover without the expense of our fully bespoke car covers  The lycra blended satin fabric allows the cover to cling to the
car whilst the subtle sheen of the fabric provides an elegant finish.   The fabric is tightly woven ensuring a car cover that gives excellent protection from dust and other pollutants at the same time as remaining fully breathable to prevent any build- up of condensation. The snug fit of these car covers ensures that the covers look
great on the cars alongside providing great protection. The low-profile seams
guarantee a sleek finish whilst showing the contours of your car. They are
available in Black complete with Westfield Logo. Will fit all Westfield models Suitable for narrow bodied, prelit, kit bodywork, ZK and FW models with Jap spec loop, RAC, MSA and FIA Roll Cage.   

WESTFIELD PART NO: 3500116

DESCRIPTION:

Rear lamp set for FW body
Kit includes all lamps bulbs and looms

WESTFIELD PART NO: 4342001

DESCRIPTION:

Standard rear shock absorbers
Suitable for some narrow bodied vehicles and early wide body vehicles.
Shock absorbers are sold in pairs

WESTFIELD PART NO: 3742001

DESCRIPTION:

1 front standard track shock absorber to suit Westfield standard wishbones.
Suitable for some narrow bodied vehicles and early wide body vehicles.
With the exception of early midget based donor vehicles.
Will not suit any wide track suspension
Weight: 1.45 kg per shock, 2.90 kg per pair.
Fitted to Westfield XI as rear shocks
Shock absorbers are sold in pairs.

WESTFIELD PART NO: 4633031

DESCRIPTION:

Side Protection Bar Kit
Bars will fit wide body chassis and can be bolt on fitment or can be welded in.
Image shows a welded in version were the bolt in tabs have been cut off.
Comes with fixings.

WESTFIELD PART NO: 3713138

DESCRIPTION:

Rear anti roll bar FW bodywork set up.
Please note that this kit is not suitable for ZK bodywork
Photo is for illustration purpose only.

WESTFIELD PART NO: 5594064

DESCRIPTION:

ZK bodywork carbon effect stone guards.
***Will not fit Sierra SDV - as they had extra wide arches fitted as standard***
Complete kit including carbon effect stone guards, x 20 pop rivets and 3.3 metres of edging piping.
Please note these will not fit the fixed rear bodywork. (non-detachable arches) 
Please also note, these will not fit extra wide arches.

WESTFIELD PART NO: 4632122B

DESCRIPTION:

Standard loop roll bar to fit all wide body cars